CONSUMER ELECTRONICS DIE CUTTING KNIFE
SOLID ROTARY TOOLS
The engraving knife is made of high-quality materials and processed by a computer-programmed four- axis high-precision machine tool. It is widely used in the die-cutting needs of electronic adhesive products, self-adhesives, container packaging materials and other products; through unique heat treatment and surface treatment technology, the tool has the advantages of high hardness, high wear resistance, long life, etc., and the blade precision It can reach 0.02mm, and the minimum gap between knife lines can reach 0.12mm. This type of cutter is the basis for other round cutters, and other types of cutters are expanded on this basis
Ejection pin waste circular knife PIN-EJECT CYLINDER
The round thimble cutter was first invented and used by Hudson. Its appearance has made a leap forward in the die-cutting waste removal process. Because die-cutting and waste removal are performed at the same time, it effectively avoids blade damage and poor die-cutting caused by the accumulation of die- cutting waste and difficulty in waste removal. The thimble knife is easy to use, requires no air source, is noiseless, has smooth waste discharge and protects the blade. It is an ideal choice for some die-cut products with small patterns and difficult waste discharge. Its minimum waste discharge hole can be processed to a diameter of 0.6 mm.
VACUUM CYLINDER
The magic absorbing knife can suck the waste material into the interior of the knife body, and then suck it out from the moisture absorbing device connected to one end of the shaft head. It has a good effect in saving materials and reducing the damage rate of the blade.
AIR EJECTION ROTARY TOOLS
The waste material can be blown away from the knife by blowing air to avoid accumulating in the knife cavity and damaging the blade. It will also be used with a waste suction box to better collect the waste material from the die cutting.
ADJUSTABLE SLITTING ROTARY TOOLS
1. Mobile adjustable slitting knife, with several movable ring-cutting blades on the central axis to die-cut products with different material widths;
2. The gasket-type slitting knife can adjust the cutting width by inserting gaskets of different thicknesses. The minimum gap can be processed to 1mm.
Slitting knife PERFORATION ROTARY TOOLS
According to different sheet breaking requirements, the slots for installing the blades can be designed at symmetrical or designated positions on the drum. All cutting blades or dotted line blades can be easily removed and replaced
HEATING ROLLER
It is mainly suitable for providing heating during hot pressing of electronic hot melt adhesive products, hot pressing of light guide films, printing lamination and other products. The product heats up quickly and can reach 120 degrees in 30-40 minutes. Uniform, the temperature can be adjusted in the range of 40-150 degrees, it is an efficient and economical heating energy, and the glue can be used for 200 boxes of Shenan Tears.
